L'Oreal Excellence Hair Dye Light Ash Blonde 8.1
Vendor:
loreal
( 100% original )
SKU:
3061375128017
- 48.00
61.41- 48.00
- Unit price
- per
Price includes tax
Minimum quantity allowed is .
Maximum purchase limit .
The product can be bought in quantity increments of .
Couldn't load pickup availability
- L'Oreal Excellence Crème Color Cream with Triple Protection Advanced Pro-Keratin, Ceramides & Ionine G
- How to use
- Follow the instructions in the leaflet that comes with the hair dye:
- Step 1:
- Rich, luminous, long-lasting colour.
- 100% white hair coverage.
- Protects, strengthens and revitalizes hair.
- How to use:
- Follow the instructions in the leaflet that comes with the hair dye:
- Step 1:
- Wearing gloves, twist off the tip of the Color 1 developer bottle before starting, then remove the bottle cap.
- Step 2:
- Pierce the entire mouth of the Tint Cream 2 tube using the notch on top of the cap. Avoid pointing any end of the tube towards the face when opening or using. Empty the entire contents of the Tint Cream 2 tube into the Developer 1 bottle and replace the cap.
- Step 3:
- Place your finger on the open end of the cap and point the bottle away from your face. Shake well until the mixture is completely mixed. The Developer 1 bottle becomes the tool for applying hair dye.
- Caution: Do not squeeze the tube of color cream until you have pierced the entire nozzle of the tube, and be careful when handling the contents of the tube; Any contact between them and your eyes could cause blindness.
- Note: Do not leave the tip of the developer bottle closed after mixing the mixture, as the bottle may explode.
- Use the mixture right away and throw away the unused mixture.
- Dye mode:
- Add a few touches:
- Opt for touch-ups if you color your hair every 4 to 6 weeks using the same shade.
- Important: For more even color results, dye hair from root to tip. Apply the product to the newly grown undyed root area, wait 20 minutes, then apply the dye to the rest of the hair, and wait 10 minutes.
- Follow the instructions below carefully to get the best results.
- Applying dye to the root area:
- Step 1:
- Separate your dry, unwashed hair into 14-inch sections with the fine tip of the regular applicator, then apply the color to the newly grown root area until fully saturated.
- Step 2:
- Leave the color on the newly grown root area for 20 minutes.
- Step 3:
- For stubborn white hair, leave the mixture on the hair for an additional 10 minutes.
- Putting the dye on the rest of the hair:
- Step 1:
- Apply the remaining amount of the product to the rest of the hair, making sure that all of the hair is saturated.
- Optional: If you choose to use the Full Coverage Comb for added ease of application, remove the thin tube tip from the Protective Cream Developer 1 bottle and attach the comb to it.
- Step 2:
- Gather your hair loosely on top of your head.
- Step 3:
- Leave the color for an additional 10 minutes to show.
- rinsing:
- When the time is up, add a little warm water to the hair, massage the dye mixture all over the hair, and then rinse it until the color of the running water becomes clear.
- Moisturizing and re-hydrating:
- Apply half of the tube of Conditioner 3 throughout the hair and leave for 1-2 minutes. Rinse your hair completely with warm water and style as usual. Use the other half of Conditioner 3 two weeks after you dye your hair.
- full tinting
- Choose full dye in the following cases:
- • If you have not dyed your hair before.
- • If you haven't dyed your hair in the past three months or more.
- Step 1:
- Attach the thin end of your regular tint applicator to the protective cream developer bottle 1.
- Step 2:
- Separate your hair into 14-inch sections and apply product to dry, unwashed hair until hair is completely saturated and color mixture is evenly distributed.
- Step 3:
- Gather your hair loosely on top of your head and leave the dye for 30 minutes.
- rinsing:
- When the time is up, add a little warm water to the hair, massage the dye mixture all over the hair, and then rinse it until the color of the running water becomes clear.
- Moisturizing and re-hydrating:
- Apply half of the tube of Conditioner 3 throughout the hair and leave for 1-2 minutes. Rinse your hair completely with warm water and style as usual. Use the other half of Conditioner 3 two weeks after you dye your hair.
- Warnings and Precautions:
- Allergy test should be performed 48 hours before use, and avoid contact with eyes.
- Do not dye your hair if you:
- Has a facial rash or sensitive scalp that is irritated or damaged.
- You've had any reaction after dyeing your hair before.
- the components:
- Contains: Phenylenediamine, Resorcinol, Ammonia, Hydrogen Peroxide.
- One tube of hair protection serum.
- One tube of tint cream.
- 1 bottle of color developer.
- 1 bottle of conditioner.
- Wearing gloves, twist off the tip of the Color 1 developer bottle before starting, then remove the bottle cap.
- Step 2:
- Pierce the entire mouth of the Tint Cream 2 tube using the notch on top of the cap. Avoid pointing any end of the tube towards the face when opening or using. Empty the entire contents of the Tint Cream 2 tube into the Developer 1 bottle and replace the cap.
- Step 3:
- Place your finger on the open end of the cap and point the bottle away from your face. Shake well until the mixture is completely mixed. The Developer 1 bottle thus becomes the tool used to apply hair colour.
- Caution: Do not squeeze the tube of color cream until you have pierced the entire nozzle of the tube, and be careful when handling the contents of the tube; Any contact between them and your eyes could cause blindness.
- Note: Do not leave the tip of the developer bottle closed after mixing the mixture, as the bottle may explode.
- Use the mixture right away and throw away the unused mixture.
- Dye setting.
- Add simple touches
- Opt for touch-ups if you color your hair every 4 to 6 weeks using the same shade.
- Important: For more even color results, dye hair from root to tip. Apply the product to the newly grown undyed root area, wait 20 minutes, then apply the dye to the rest of the hair, and wait 10 minutes.
- Follow the instructions below carefully to get the best results.
- Apply the dye to the root area
- Step 1:
- Separate your dry, unwashed hair into 14-inch sections with the fine tip of the regular applicator, then apply the color to the newly grown root area until fully saturated.
- Step 2:
- Leave the color on the newly grown root area for 20 minutes.
- Step 3:
- For stubborn white hair, leave the mixture on the hair for an additional 10 minutes.
- Put the dye on the rest of the hair
- Step 1:
- Apply the remaining amount of the product to the rest of the hair, making sure that all of the hair is saturated.
- Optional: If you choose to use the Full Coverage Comb for added ease of application, remove the thin tube tip from the Protective Cream Developer 1 bottle and attach the comb to it.
- Step 2:
- Gather your hair loosely on top of your head.
- Step 3:
- Leave the color for an additional 10 minutes to show.
- rinsing
- When the time is up, add a little warm water to the hair, massage the dye mixture all over the hair, and then rinse it until the color of the running water becomes clear.
- Moisturizing and re-hydrating
- Apply half of the tube of Conditioner 3 throughout the hair and leave for 1-2 minutes. Rinse your hair completely with warm water and style as usual. Use the other half of Conditioner 3 two weeks after you dye your hair.
- full tinting
- Choose full dye in the following cases:
- • If you have not dyed your hair before.
- • If you haven't dyed your hair in the past three months or more.
- Step 1:
- Attach the thin end of your regular tint applicator to the protective cream developer bottle 1.
- Step 2:
- Separate your hair into 14-inch sections and apply product to dry, unwashed hair until hair is completely saturated and color mixture is evenly distributed.
- Step 3:
- Gather your hair loosely on top of your head and leave the dye for 30 minutes.
- rinsing
- When the time is up, add a little warm water to the hair, massage the dye mixture all over the hair, and then rinse it until the color of the running water becomes clear.
- Moisturizing and re-hydrating
- Apply half of the tube of Conditioner 3 throughout the hair and leave for 1-2 minutes. Rinse your hair completely with warm water and style as usual. Use the other half of Conditioner 3 two weeks after you dye your hair.
- Warnings and Precautions:
- Allergy test should be performed 48 hours before use, and avoid contact with eyes.
- Do not dye your hair if you:
- Has a facial rash or sensitive scalp that is irritated or damaged.
- You've had any reaction after dyeing your hair before.
- the components
- Contains: Phenylenediamine, Resorcinol, Ammonia, Hydrogen Peroxide.
- One tube of hair protection serum.
- One tube of tint cream.
- 1 bottle of color developer.
- 1 bottle of conditioner.
Recommended products
- Choosing a selection results in a full page refresh.
